Blog Archives
Tips on How to Speed Up Your Computer
Listed here are tips on how to speed up computer:
- Remember to free up your disk space using disk clean-up or disk defragmenters. Unnecessary files like temporary internet files can slow down your computer so get rid of them, empty your recycle bins frequently, and make sure that your important files are placed on the external hard drive.
- Scan for viruses and worms, spyware and adware. Always check for these nasty programs because they make your computer work slowly more than anything. You need to purchase PC fixer software that can remove these programs.
- Clean up your desktop. If your desktop is flooded with files your computer will eventually function slowly.
- Uninstall unused programs. Your computer might have lots of unused programs installed on it; uninstall them because once a program is installed, it makes a connection between the program and the operating system which also make your system run slower even if you do not use them.
- Do not start up programs automatically when turning on your computer. Make sure that you close programs you do not use that open when you start up your computer.
- Defragment your hard drive. Defragmenting your hard drive places all of your information for each file in one place which will result to a faster computer experience.
| T h i n k A n y t i m e |
Related articles
- How to Improve Your PC’s Speed for Free in Seven Easy Steps (thinkanytime.wordpress.com)
How-to Remove System Tool 2011 Virus Easily
Aias: System Tool 2011
Damage Level: Medium
Systems Affected: Windows 9x, 2000, XP, Vista, Windows 7
Image Credit – Life StreamsYou may have tried for hours trying to remove this virus just like I did in vain but finally here I found a very simple method to remove this malicious software made to look like a legitimate anti-virus program.Screen Shot Image:
- All you have to do is enter the serial key to register “System Tool” and follow the rest of the steps.
The key is WNDS-S0DF5-GS5E0-FG14S-2DF8G
- After inputting this key wait for little and you PC will restart automatically and all is okay again.
- Then you can go ahead and delete icon from desktop and remove the software from program.
Share with all your friends. Its useful…!
Thank you.
| T h i n k A n y t i m e |
Windows Vista tweaks to speed up your system.
Default settings that Windows Vista comes with are more meant for hardware of future than hardware of today. If you are looking for your vista to run faster and perform better, it is essential that you optimize your Vista settings. Read on to find out 4 powerful Windows Vista tweaks to speed up your system.
- Tweak 1 ► Get Rid of Unnecessary Programs from System Start Up
One of the most powerful vista tweaks is to remove all unnecessary programs from the start up menu. Start up should only contain those bare minimum programs which are really necessary to be started up when your program boots. If there are some programs which are not that essential, but still need to be there in start-up, you can reschedule them to a lower priority & attach them to one of the multi-processes.
- Tweak 2 ► Turn off TCP Auto Tuning and Remote Differential Compression
Vista uses these to augment the gigabyte network. However, these end up being too much of an overhead for normal networking. The networking speed is enhanced by up to 30 percent when you disable these options.
- Tweak 3 ► Defrag Your Hard Disk
Over time, application and files become scattered in different places on your system’s hard disk, affecting the system’s performance greatly. When you defrag your disk, it brings all these scattered pieces together, thus, improving the Windows system’s speed. You can run the disk defragmenter from
Start ► Menu Programs ► Accessories ► System Tools ► Disk Defragmenter.
- Tweak 4 ► Disable the “System Restore” Feature
It was with Windows XP that this feature was first introduced. Windows Vista enhanced it further with introducing additional document versioning. Though it does sound very good and useful, it does have a great impact on the resources. If you think your system is already not running as it should be, you surely won’t want additional duplicates on your system further downgrading your system’s performance. Thus, another of effective vista tweaks would be to disable this feature.
| T h i n k A n y t i m e |
Related articles
- How to Improve Your PC’s Speed for Free in Seven Easy Steps
- windows vista layouts services
- How to Do Everything with Windows Vista Media Center ebook free download
- Review Your Startup Programs to Speed up Your PC
- Creating a Bootable Back-up of Windows Vista on a USB Drive
- The 35 Best Tips and Tricks for Maintaining Your Windows PC
How to Fix Boot Problem in Windows 7
Click on “Repair Your Computer” as shown.
Again some windows component will load and then the below screen appears
Click on “Command Prompt” and enter the following command to fix boot issue.
Step 8
Now restart the system, it will boot correctly and windows will work fine.
Related articles
- Easy Steps to Improve Your PC’s Boot Up
- How to Fix Boot Problem in Windows 7 (thinkanytime.wordpress.com)
How can you Configure AVG Anti-Virus with your Router?
Have you installed AVG Antivirus in your system? Whether you avail the business version or the home version, you will get firewall protection from it. No intruder can access your PC due to this protection. In spite offering your protection against the hackers, firewall can create certain problems in case you are using router for the home network.
In this case, proper configuration of AVG Anti-Virus software is necessary when router is used to setup the home network. For any such configuration and other services, you can subscribe to the technical support monthly packages to enjoy smooth computing. Any issue with your router, modem and computer will be readily solved.
Step 1 : Right clicking the icon of AVG, choose Open AVG User Interface > click on Components > select Firewall.
Step 2 : Next, click on Configure > choose Create a new configuration, in case you have not run the wizard of configuration. Then select Update Current Settings when you have already run AVG wizard.
Step 3 : When you have connected your computer only to your router, you have to select the option for one computer. However, if multiple computers are connected to the same router, you have to select the network option.
Step 4 : Again, when you are suing wireless router, the selection will be different. The remote technical support professionals are the best guides to help you with the selection process.
Step 5 : Click on Next > Complete Scan > Next for total scanning.
Step 6 : Lastly click on Next and make the choice of the domain according to the computing device you have connected to.
How to Create a Backup for Outlook Express Account Settings?
Your entire internet emails are now can be found in one single location – the Outlook Express. This desktop mail program retrieves and saves all your mail messages. After you have setup your email account and provided all the credentials, Outlook Express keeps checking your account periodically.
This program downloads your mail messages from your account and helps you to view them from the Outlook. What will you do if you plan to change your computer system? In that case it will be wise to keep a backup of the settings and your accounts. Email backupservice providers are the best guide to take the assistance from.
Setting up Outlook Express Information
Step 1 : First of all make one backup folder in your PC. Browse the location you wish to save your folder and choose New, then Folder and finally naming it as Outlook Backup.
Step 2: Go to the Outlook Express folder either from Start or any other type of shortcut you have for accessing this folder.
Step 3: Click on Tools > select Accounts.
Step 4: Click on Mail tab and you will get an entire list. Then choosing the account setup you wish to create a backup for, click on Export.
Step 5: Go to the box of Save In and after finding your created folder, click on Save.
Step 6: When you are done with the entire process, click on Close.
If there is any issue with any of the st
How to fix the problem of a Bluetooth-enabled Dell Travel Mouse?
The increasing popularity of the laptops has also increased the number of peripheral devices. The travel mouse is one of the devices that come in the line of the peripheral devices. Are you fascinated with a small mouse? Then the travel mouse is the right choice for you. It is a small mouse offering you the ease of transport.
If you are thinking travel mouse from Dell, you can go for the Bluetooth travel mouse with the help of which you can connect your PC wirelessly to your Dell mouse. Enjoy wireless connectivity with your Dell Bluetooth mouse.
The Dell support professionals can help you when you face any problem with your Bluetooth mouse. Following certain troubleshooting methods you can resolve the problem with your Dell Bluetooth mouse and obtain its normal functioning.
Step 1: You should first check the mouse battery by opening the cover of your Bluetooth Dell mouse. When the batteries get exhausted, you should replace this.
Step 2: There may be some error in setting the connection between your Bluetooth mouse and the PC. Restarting the Pc often solves this problem.
Step 3: One very important thing that you need to check is the Bluetooth connectivity of your PC. If you find any issue with the Bluetooth functionality of your PC, refer to the manual for turning the feature on.
Step 4: Finally, you should reinstall the Bluetooth software, in case your PC has Windows XP. Any problem with the installation of the blue tooth connection will prohibit your mouse from working on its normal way.
How can you Troubleshoot Windows Media Player issues?
Playing any music on your PC is a common trend among the PC users. Windows Media Player is your media application present by default on your Microsoft Windows OS. Whenever you play music in your PC, the Windows Media Player caters you the experience you wish for.
But is this media application free of errors? Like any other software application, this Windows Media Player can at times show certain problems. You can seek Windows support to know about the different troubleshooting methods. It is possible to resolve any problem of Windows Media Player, if you can successfully troubleshoot the software.
In case you face any problem with the troubleshooting methods, you are free to consult the professional experts. Take a look at the steps here:
You should first make an attempt to update the Windows Media Player version. Visiting the Microsoft website, you can update your version of the default media application. If you have the latest versions or Windows Media Player 10, you can have the privilege of playing majority of the files without any codec download.
Troubleshooting the choppy or flickering video is your next task. Generally upgrading the Media Player version can resolve this issue. If not, you have to take resort of video acceleration for fixing the playback issue.
Finally, you should try to resolve the problem regarding full-screen playback. Often you are not able to watch a video on full screen. To fix this trouble, visitTools > Options > Performance > click Advanced tab > choose ‘enable full screen mode’.
How can you Create Backup in Outlook 2010?
Windows 7 is the commonly used operating system nowadays. This OS offers you its backup software providing you various options for backing up your important files both automatically and manually. But these backup options do not include Outlook 2010 due to its way of storing the data. Is the idea not
clear to you?
Well, in Outlook 2010 data is stored in the Personal Folder where files have the .pst extension. This is normally overlooked by the backup software.
Fortunately, Microsoft provides you the Outlook 2010 Export function which facilitates creating your backups of all important data and mails. You also get the privilege of storing these important files on a different drive other than the one where you have stored your Outlook files.
How to use this Export function?
- Opening the Outlook, click File > Open in Backstage > Import > a listing of actions will be displayed.
- Click Export to a file > Next
- Click Outlook Data File from the listing of file types > Next
- Click Outlook 2010 > Next
- Select a location where you can save the backup of the files. You are suggested to keep these files in some external drives or USB drive or DVD and CD.
- Set Replace Duplicates With Items Exported as default > click on Finish.
- You can locate the files in the Outlook by clicking File > Open > Open Outlook Data File.
For any difficulty with the process, call up the professional technicians available online.
How to resolve the unresponsive Dell Inspiron Touchpad or Mouse? | Digital Life – http://www.cubesquare.co.cc
Dell Inspiron laptops and desktops have reached every household in the recent times. Are these systems free of errors? Certainly not. Issues have been detected with the touchpad or the mouse. It can become unresponsive, if you have corrupted driver setting. This issue can bug you, if you do not fix it on time. Proper troubleshooting methods are offered by the Dell Support experts. Seek their assistance right away!
Do you think that you have to get a new laptop or mouse? However, this is not the case always. A newly up-to-date driver is the ideal solution to regain the normal functioning of your touchpad or mouse. Here are the steps for you. Follow the steps and recover your lost settings easily.
♦ Don’t think that you can use this method only once. Try it again and again, if required.
Step 1 : Browse to “driversdr.com/dell/index.php?id=madldr1“. Once you have navigated, install Driver Navigator after downloading.
Step 2 : Open up the Driver Navigator and click on “scan now”. Wait for a few minutes. This program will recommend you certain drivers suitable for your purpose. Once you get the drivers, choose “update drivers”.
Step 3 : Once you have done all these, restart your Dell Inpsiron laptop or desktop. Your touchpad or mouse is sure to work in its normal way, if you are successfully in troubleshooting the issue.
Related articles
- How to resolve the unresponsive Dell Inspiron Touchpad or Mouse? (thinkanytime.wordpress.com)
- How to fix the problem of a Bluetooth-enabled Dell Travel Mouse? (thinkanytime.wordpress.com)
How can you configure Linksys router for a repeater?
Do you like to connect multiple computer systems to a single network? What can be a better option than using a wireless router? Linksys routers are the first choice of the PC users who wish to connect a number of PCs with the same internet connection. With Linksys routers you can share files among the computers under the same network.
Want to have further wireless signal across the room? If you desire to have wireless signal over different rooms, you have to configure your router with the repeater. Access point and Linksys routers have this feature of configuration in the setup menus. You can know about this router and its configuration from the Linksys support service providers.
Configuring the router with the repeater will extend the signal range farther. How to go about with this configuration? Here it is:
Step 1 : Get access to a computer connected with a Linksys device.
Step 2 : Open a browser and visit the setup page of Linksys device athttp://192.168.1.1
Step 3 : Type in the password and username for Linksys and select ‘Log in’.
Step 4 : Go to ‘Status’ tab and click on ‘Wireless’ link.
Step 5 : In the ‘MAC address’ type in 12 numbers and letters and browse to the Setup tab.
Step 6 : Click on ‘AP Mode’ under Setup heading.
Step 7 : Click on ‘Wireless Repeater’ and type in the MAC address you have previously inserted.
Step 8 : When you are done, click on Save Settings and the configuration of the device is completed.
How to have Backup of Email Folder in Windows Live Mail?
Windows Live Mail is a new email service sharing all the features of Windows Mail and Outlook Express. This new mailing service has the export wizard that offers you the privilege of having email backup. Do you have multiple folders? Are your email files larger in size? This is not at all an issue with this export wizard! You can backup each and every mail no matter what its size or what numbers of folders you have.
Get all your mails in external device or hard drive with proficient guidance! Again, for restoring all your backup mail files, you have the import wizard from Windows Mail. Want to know the process of backing up your email files? Take a quick glimpse at the steps here:
- Click on blue button in Windows Live Mail at the top left hand corner
- Point the mouse to Export mail > click on Email messages
- Click on your preferred format – Windows Live Mail or Microsoft Exchange
- Click on Next option
- Click on Browse and choose a folder for sending all your exported mails.
- Make a new folder by clicking on Make New Folder > type in the folder’s name > click on OK Click on Next
- For backing up all mails, select All folders and for selective file backup, click on the option of Selected folders
- Click on Next and then Finish
All your Windows Live Mail files and folders will get exported to your selected folder.
How to Compress Files in Folders
Wondering how your hard drive space is diminishing day by day? Don’t exactly realize that with each file you save the remaining space on your hard disk is reducing? Is your system also slowing down due to lack of hard drive space? Don’t want to buy an external hard disk but improve the performance of your system? Your solutions are just a call away. Call the toll free number of acomputer repair service provider to get the solution. These companies offer services for the following issues:
• Getting not enough disk space message
• WinRAR out of date
• Computer running slow
Let’s take a look at how you can compress files in folders. Right click on the folder that you want to compress, select send to and then click on the compressed folder. You can also create a .zip file to reduce the size of the files. But the thing to be noted is to select the proper procedure for different type of file. For this you may get help from an online computer support provider.
How to Transfer your Email Folder to the Hard Drive?
Emails can have information as well as pictures and photographs. Various types of email files enter your inbox everyday – business mails and personal email files. These email files contain vital information which you may require to save in the hard drive. It’s a good idea!
You will not have any problem in saving the data. This transferring of information is essential since hackers can get inside your mail account and delete or ruin all your essential information. Email backup services can help you in moving all your mails from your account to the drive.
To add to your delight, you can also have the privilege of adding an entire folder by either exporting or saving it. Want to learn the process of saving an email folder? Take a quick look at the steps.
- Opening your inbox, click the message containing your email folder and then right click it. You will get the option of “Save As”, select it.
- Select a specific location on your hard drive and clicking on OK, save your files in that particular location. You should name the folder so that you can identify it later.
- Select “Save”
- Finally, click the heading of email folders where your messages are saved. It can be the Sent folder, Inbox or your personal folder.
- Double click or right click it unless you get the option of Save Folder.
- You can now save your messages as one document in your PC.
If you are not able to find the Save As option, get the remote computer services to help you in another way round.
How to Enable the built in Anti-spam with Exchange 2010
Just a short one on how to enable the Anti-Spam function on the Hub Transport server, this is written for Microsoft Exchange Server 2010 however it is the same process for Exchange 2007 also. This ads some useful functions like IP Block list Providers, Sender Reputation and Content Filtering options.
First close your Exchange Management Console (if you have it open) on the Hub Transport server
Exchange Management ShellThen open up the Exchange Management Shell. It should be in Start – All Programs – Microsoft Exchange Server 2010 – Exchange Management Shell
It should look something like this below.
Now we are going to run the following command.
SetTransportServer -Identity ‘Your Hub Transport Servers Name’ -AntispamAgentsEnabled $true
It should look something like the below, substituting your server name for the mail-serverpart of course.
SetTransportServer -Identity ‘mail-server’ -AntispamAgentsEnabled $true
Now when you go back into your Exchange Management Console you will have a couple of new tabs in your Organization Configuration -> Hub Transport and also in your Server Configuration -> Hub Transport both new options are called Anti-Spam and are shown below. Checkout whats in them and I might put up a few additional help blog posts on adding functionality with filtering settings and whatnot at a later stage.
Happy Exchange 2010′ing. Questions in the comments. Cheers
How to Change Dock Icons on a Mac
 |
 There are many reasons to change the icons that appear in the Dock on our Mac, and it’s easy enough to do, leaving you no reason to have to stick with the ones that are automatically attached to files and folders. If you want the dock icons to be something more personal to you, to all match a particular theme, or just have a change of pace, you only need to change the actual icon for that particular app or folder. It’s that easy,Free Icon Sets are found all over the web. The particular one I’m using for this piece was found at Icon Drawer. Initiate the download as you would with any other download, making sure you follow the usage rules laid out on the site.
I want to change my Pictures Folder icon to being black and blue like the logos surrounding it. It’s not even clear looking at this which one it is. Currently it’s the top one shown here and showing the contents of the folder. I’m going to both change the icon, and change this setting so that it shows the icon, and not the contents.
The first thing I need to do is select the new file that contains the new logo. Instead of opening it, though, I go to the FIle Menu and pull up “Get Info,” or press Command-I.
From the resulting pop-up, select the tiny icon in the upper left corner and go to the Edit menu and pull up on “Copy,” or press Command-C.
If I clicked on the folder in the dock, it would open it. Instead, I find the application on my hard drive and “Get Info” the same way I did to copy the new logo. This time after I select that small icon in the upper left, I go to the Edit menu and “Paste,” or press Command-P.
To get the change to be reflected in the dock, I need to drag the folder out of the dock and replace it with the changed folder. I still see the contents of the folder, though, and that’s because it’s saved as a Stack and not a Folder. To change this, right click on the folder, and change it from Stack to Folder.
It should be noted that not all dock icons can be changed in this manner. The icons that ship with the Mac OS, such as iTunes, Mail, etc., are set so that you can’t simply copy and paste it away. You will need a program such as CandyBar to do that. However, that application comes with a $29 pricetag. |
How to Remove Antivirus Security
Antivirus Security is a (fake) rogue anti-spyware program. Often contracted from popup advertisements on sites pretending to be online anti malware scanners, the visitor may encounter fake security alerts saying your computer is infected and you should download and install Antivirus Security to fix the problem. If the visitor decides to download and install the software, it will scan your computer, summarizing and listing all sorts of security risks that cannot be removed unless you proceed to purchase the program.
This fake Antivirus Security may also install a shortcut labeled Protection Center in the Control Panel. This is a false Windows SecurityCenter that will say you have no Antivirus protection attempting to direct you back to the Antivirus Security homepage where you can download and install the software.
If this looks like what has happened to your computer, read on to learn the simple solution to remove this fake Antivirus Security once and for all.
Removing Antivirus Security (Automatically)
- Download and install Malwarebytes Anti-Malware software
- Run the software and perform a simple scan to detect and remove Antivirus Security
Note: Although the Malwarebytes tool will remove this threat for Free, if your existing Antivirus solution let the threat through, I highly recommend Purchasing the Pro version of Malwarebytes Anti-Malware for live protection and future malware threat prevention.
Removing Antivirus Security (Manually)
- Delete the following flies from your computer:
- %UserProfile%DesktopAntivirus Security.lnk
- %UserProfile%Start MenuAntivirus Security
- %UserProfile%Start MenuAntivirus SecurityAntivirus Security.lnk
- %UserProfile%Application DataMicrosoftInternet ExplorerQuick LaunchAntivirus Security.lnk
- c:WINDOWSsystem32scui.cpl
- Click Start > Run, type regedit and delete the following registry entries:
- HKEY_CURRENT_USERSoftware
9178374C66E059CC11C19DCD899FD538 - HKEY_CURRENT_USERSoftwareMicrosoftWindows
CurrentVersionUninstallAV9
- HKEY_CURRENT_USERSoftware
If all goes well, this Fake Antivirus Security should now be removed from your system.
Enjoy! 
Related articles
- Strategies For Removing Malware and Viruses (thinkanytime.wordpress.com)
T h i n k A n y t i m e . i n 
How to Obtain Microsoft Windows Updates
Jun 15
Posted by Nikesh Jain
There are two ways to obtain Microsoft Windows updates:
Here is how to turn ON Automatic Updates and help protect your Windows PC
» Instead, if you are under control panel category view, click Performance and Maintenance ► click System, and then click the Automatic Updates tab to choose the update option you want. Update option Automatic is recommended as it automatically downloads and installs updates at your chosen time.
| T h i n k A n y t i m e |
Send this to
Posted in How to, Tips & Tricks, OS - Windows 7, OS - Windows 8, OS - Windows Vista, OS - Windows Xp
27 Comments
Tags: -enabled, .com, 2000, 2003, 2007, 2008, 2011, 2012, 7, ?, a, AC power, Account, advertising, advice, affiliate, analytics, Any key, anytime, article, atom, Automatic Update, back, Backup, BATTERY, battery software, BIOS, blog, Blogger, Blogging, blogosphere, Blogs, Bluetooth, bluetooth connectivity, Bluetooth Dell, bluetooth mouse, boot, Booting, Business, chrome, co.cc, Command Prompt, comments, Computer, Computer file, content, Control Panel, Crash, create, Data, Data loss, Data recovery, deejay, dell, Dell Inspiron, dell support, Dell Support Center, Design, desktop mail, Disk Management, document, Download, DVD, Email, Email client, engines, Express, extensions, facebook, feeds, Files, find, Fix, for, Free, freelance, get, Gmail, google, grammar, Hard disk drive, Hardware, Hardware Support, HIBERNATE, History of the battery, Home, How, how to, Ideal solution, in, Inspiron, Intel Core, Internet, Internet Explorer, IPhone, iPod, is, jain, jobs, Laptop, leopard, Links, Linux, lion, Lithium-ion battery, loss, Mac OS X, Macintosh, mail messages, mail program, mail tab, make, malware, Marketing, Media, microblogging, Microsoft, Microsoft Outlook, Microsoft Windows, minds, MiniTool, money, Mouse, my, mycomputer, Networking, news, nikesh, nikesh jain, nyk jain, of, On, online, Operating system, Operating Systems, or, our, Outlook, Outlook Express, pack, Peripheral, Personal computer, Pictures], post, premium, problem, professional, promotion, Random-access memory, recovery, resilve, resolve, rss, search, Select (magazine), SEO, service, setting up outlook, setting up outlook express, Settings, SLEEP, Snow, Social, Startup company, Storage, The, the last thing, Themes, think, thinkanytime, tips, to, tooth connection, Touchpad, traffic, Travel, Tricks, Tricks and fun, Troubleshooting, troubleshooting methods, tumblr, tutorial, Twitter, unresponsive, vista, we are busy, Web browser, Website, when, Window, windows, windows 7, Windows Server Update Services, windows update, windows vista, windows xp, Wireless, wireless connectivity, wordpress, writing, xp, YouTube